|Posted: Dec 14, 2008Post Subject: How to interpret "Cache Creek - At Rumsey (Gage)"
|CDEC operates a gauge on Cache Creek at Rumsey. Apparently, the site location isn't a very good one, inasmuch as changes to the channel continually seem to change the calibration of the gauge, especially at low flows. Right now (December 2008) the gauge seems well-calibrated, but after the first heavy rain, who knows? In any case, to cover our bases, Dreamflows reports two entries for Cache Creek - At Rumsey, as follows:|
This one - reported as Cache Creek - At Rumsey Bridge (Gage) - reports the flow as it comes off the CDEC gauge. When flows are low (during summer and fall, and in winter/spring during major lulls between storms) this gauge is suspect. During high-water events, especially during winter storms, the gauge tends to be acceptably accurate.
On the other hand, the other Dreamflows flow site - marked Cache Creek - At Rumsey (Calc) is the sum of three different upstream gauges, and it tends to be accurate when flows are low, but inaccurate when flows are high. See this posting for more details.
As a general rule of thumb, then, use Cache Creek - At Rumsey (Gage) at higher flows, and use Cache Creek - At Rumsey (Calc) the rest of the time.
|Until now, Dreamflows reported two flow sites for Cache Creek at Rumsey, see previous post in this thread.|
USGS took over operation of the physical gauge in 2015, and appears to have done a good job of keeping it calibrated since then. Consequently, the Cache Creek - At Rumsey Bridge (Calc) computed virtual gauge is no longer needed, so has been taken off the Dreamflows reports. To match, Cache Creek - At Rumsey Bridge (Gage) has been renamed to just Cache Creek - At Rumsey Bridge.
Bottom line: Dreamflows now reports only one flow site at Rumsey, and it's a physical gauge called Cache Creek - At Rumsey Bridge.